Description
Hornady Matchgrade Bushing .289 Md: 594289
The Hornady Match Grade Bushing is required for use with the Hornady Neck Sizing die. It is a self-centering, interchangeable bushing for extreme precision in neck sizing. FALSEtes:- Bushing fits in Hornady Match-Grade full length and neck sizing die- Bushing is self-centering in die bodyUse of Hornady Match Grade Neck and Full Length Dies and Bushings:- Hornady Match Grade dies have a separate, interchangeable neck size bushing (FALSEt included with die).- The dimension of the bushing (inside diameter, listed) determines the neck size when the brass is inserted into the die.- Standard dies size to SAAMI minimum specification and this is often FALSEt necessary, as a particular rifle, brass type and chamber may FALSEt needminimum dimensions. Less sizing results in less working of the brass.- Using some loaded or dummy cartridges that fit the rifle’s chamber without excessive play, measure the diameter of the case neck. Subtract.001″ from that diameter and the result should be a reasonable starting point for the correct bushing dimension. Select a size that is at that dimension or just under it.- Bushings work in both the neck and full length Match Grade dies. The bushings are available in .002″ increments.- The 242, 244, 246 and 248 bushings are for the 223 Remington and 22-250 Remington cartridges.- The 260, 262, 264 and 266 bushings are for the 6mm PPC and 243 Winchester cartridges.- The 332, 334, 336 and 338 bushings are for the 308 Winchester cartridge.Specifications:- Finish: Polished Steel- Diameter: 0.289 Inches
